Usage Guidelines

Suitable for use on all hard, non-porous surfaces where microorganisms or odours are a concern. Heavily soiled surfaces require a pre-cleaning.

 To Disinfect

Thoroughly wet the surface with the product.

Can be applied by cloth, sponge, brush, or sprayer (spot test to check compatibility with the surface). All hard surfaces must be wet thoroughly, and remain wet for at least 10 minutes and allowed to air dry. On food contact surfaces, a rinse with potable water is required. For lasting protection against mold and mildew growth, follow with an application of Concrobium Mold Control.

 To Clean & Deodourize

Apply the product to the soiled surface and wipe clean. To remove heavy soil, allow product to stand for a few minutes.

 To Clean & Deodourize Carpet/Fabrics

Concrobium Broad Spectrum Disinfectant II can be used on most fabrics that can be cleaned with water-based cleaners. Not for use on wool, silk, or suede. Always test for colour fastness and material compatibility on an inconspicuous area prior to use. Apply by sprayer, to ensure even coverage. Do not rinse, use hot water extraction wand to remove product from treated surfaces and then dry stroke carpet to remove excess moisture. Carpet can be air dried or fans may be used if carpet needs to dry more quickly.